External standard type 2ch digital thermistor
checker (high current measurement type)
Compare two-measured thermistor with
external standard thermistor at one time,
●Compares with external standard thermistor or polymer
PTC element, can be percentage measured for standard
value regardless of temperatures characteristic at
●Process high speed the percentage measurement for
high resistance thermistor depends on Rs/Rx at the same
●Can be measured resistance value of external standard
and measured object
●The function can be corrected an error of external
standard resistance value [±9.999%]
●Installed digital comparator for right and wrong
judgement can be set instinctively
●Measurement current, a checking circuit of an abnormal
measuring current are equipped as standard
●Machine interface and RS-232C interface are equipped
as a standard
AX-1138B selects to judge the device that is sharp at temperature change such as thermistor or polymer PTC element to compare high speed by connecting the standard device outside, it can be measured for the two Rx resistance at the same time. The function set a corrected value for a true standard is equipped to use the external standard device.
As Rs and Rx always measures at the same time, it can be percentage measurement to reduce the effect of commercial power on the high resistance measurement.
●GP-IB Interface ●RS-232C Interface ●AS-5927 control board
*Either one interface can built-in the option above.